How to reduce the cost of breeding by using chicken cages to raise chickens?

With the development of the times, the prices of various industries have risen sharply, and the cost of feed used by farmers to raise laying hens has also increased. Although the help of layer rearing equipment can save a lot of manpower and material resources, the cost of raising chicken is still getting higher and higher. How to effectively control the waste of feed and increase the feed conversion rate has become a hot topic in the aquaculture industry.

In the production, we must ensure the quality of chicken products, but also pay attention to economic benefits. The author will talk about how to improve feed compensation and reduce feed waste during the feeding process.

1. Eliminate low-yield chickens in time. Timely elimination of low-yield chickens can effectively save feed. In production, the first is to timely eliminate low-yield chickens that have not been opened or have been produced for 30-35 weeks of age, but have a short egg production period. Second, they must eliminate chickens that are often closed, overweight or overweight. Small and thin chickens, chickens with serious sorrows; third, chickens with poor growth, disability, weak chickens, strong nesting and early maturity.

2. Reduce materials in time. When the laying hens have peaked (usually around 42 weeks), they should be reduced in time. The method is: according to the chicken day reduction of 2.5 grams, observed 3-4 days, to see if the decline in egg production rate is normal. If it is normal, you can reduce it by 1-2 grams the next day. If there is still no abnormality, you can reduce it by 3 grams. This will not affect the production of eggs, but also prevent the body from being over-fertilized, which can ensure the supply of nutrients and reduce the waste of feed.

3. Change even material to feed less frequently. Homogenization can easily provide an opportunity for disease transmission among chickens, which is not good for the health of chickens. Therefore, should be changed into a uniform feed for feeding, feeding several times a day less frequently, and as far as possible according to the number of chickens and their intake feed. The trough must be kept empty for about 30 minutes every day to ensure that the chickens eat up the feed on the spot.

4. Anti-rats and birds stealing materials. Most chicken farmers have problems with rats and birds. If you don’t pay attention, the consequences are very serious. One is to cause waste of feed, and the other is infectious diseases. The farm can regularly carry out bait and rodent control. Doors, windows, vents, etc. are placed on the protective net to prevent birds from entering.

5. Prevent mildew from feed. Especially in the high temperature and high humidity season, if the feed is improperly stored, it is prone to mold and waste. Therefore, the feed should be stored in a dry, clean place, and be protected from moisture and rain.

6. Reduce waste and throw. In the process of feed processing, transportation and feeding, it is necessary to prevent the phenomenon of feed sprinkling. If the transport bag is damaged, tight, and whether a fan is turned on when feeding, this may be rare for each waste that is wasted, but at the end of each feeding cycle, the total amount of waste is still large.

The above is a suggestion for the author to reduce the cost of breeding in the process of raising chickens in layer battery cages. I hope the above answers can help the farmers.

  The composition of the overlapping laying hen cage equipment system

The battery cage for layers equipment mainly consists of a cage system, a feeding system, a drinking water system, a lighting system, a waste disposal system, an automatic egg collecting system, and an environmental control system. The use of mechanized laying hen cage equipment allows for a rhythmic cycle of hatching, brooding, and the production of the last commercial chicken or commercial egg. Most of the houses are closed or semi-enclosed, with automatic adjustment equipment to control the microclimate and lighting in the house, so that the house can be produced in a balanced manner throughout the year, achieving high mechanization and automation. In this mechanized farming mode, the breeder can automatically complete feeding, collecting eggs, removing feces, ventilating, controlling temperature and humidity in the house, lighting time, spraying disinfectant and Add soluble medicine to the drinking water.


Please read instructions carefully when using or maintainace.


There are still many advantages to using the overlapping egg cages to raise chickens. It is necessary to know that the overlapping chicken cages have a small footprint and a large number of layers, generally four layers, up to 10 layers. The cascading egg cages can obtain more feeding area, improve the laying rate of laying hens, and have higher efficiency. For easy maintenance and repair, follow the prompting steps to control the cage system. Egg automatic conveying system can improve the cleaning rate of eggs. Convenient for disinfection, easy to control parasitic diseases such as coccidiosis and helminth infection; automatic drinking water system can ensure equal water pressure in the nipple, to ensure the drinking water of the laying hen.


The overlapping cages have better ventilation and ensure that the laying hens in the layer battery cage system do not die due to excessive temperature suffocation. With the clearing belt, the cleanliness of the cage system can be ensured, the growth of pathogens can be reduced, and the disease rate and mortality of laying hens can be reduced.

Why use layer chicken cages for raise chickens?

Layer chicken cages are currently a popular form of feeding because the design of the layer chicken cage provides a comfortable environment for the chickens to play a better role in the feeding process. The main advantage of the design of the layer chicken cage is in the front net and the cage door. The density of the cage feeding and the angle of the egg are more reflected in the interests of the chicken. Egg cages are used to raise chickens. Generally, they are introduced from 18 to 20 weeks of age. When they are raised to 72 weeks of age to complete a production year, they are eliminated. Therefore, in the good environment of the chicken house, there must be a well-structured chicken cage to enable the laying hen to exert its high production efficiency.

When handling feces, be careful not to lose moisture from the feces. At present, the better solution is the safe processing technology of livestock and poultry manure. The untreated livestock manure contains harmful bacteria such as Escherichia coli, nematodes and other pests and eggs, and the untreated manure is applied to the soil. It is easy to cause the fermentation to heat up and burn the seedlings. Decomposition in the soil produces harmful gases such as methane and damages the roots, and it is also easy to cause soil hypoxia and affect crop growth. Therefore, in order to improve fertilizer efficiency and reduce damage to crops and the environment, livestock manure must be fermented and fermented before it can be applied to farmland.

Poultry farming equipment maintenance should be carried out in accordance with maintenance procedures. Equipment maintenance procedures are requirements and regulations for routine maintenance of equipment. Persistence in equipment maintenance procedures can extend equipment life and ensure a safe and comfortable working environment. The main contents should include: 1. The equipment should be neat, clean, sturdy, lubricated, anti-corrosive, safe, etc., the working content, working methods, tools and materials used, standards and precautions. 2. The parts, methods and standards for daily inspection and maintenance and regular inspection. 3. Check and assess the content and methods of the operator’s maintenance equipment. Check and assess the content and methods of the operator’s maintenance of equipment.

The stocking density is closely related to the growth and development of the chicks. The density of the flock is too large, eating overcrowded, grabbing water and eating, and hunger and satiety. The chicks grow slowly and are not well-developed. If the density is too large, the air in the brooding house will be dirty. It will lead to an increase in carbon dioxide content, a strong ammonia smell, a poor sanitation environment, and chicks are susceptible to diseases and are prone to nausea. The density of chickens is too small. Although the chicks are well developed and have a higher survival rate, the utilization rate of the houses is reduced, it is not easy to keep warm, and the cost of brooding is increased, which is economically uneconomical. To determine the appropriate stocking density, it should be flexibly controlled according to the specific conditions of the variety, season, structure of the house, ventilation conditions and feeding conditions.

Control the density of culture. The density of the flock is too large, the litter is easy to be wet, and the excrement is increased. In the warmer environment, the litter and excrement are easily fermented and deteriorated, generating harmful gases such as ammonia and hydrogen sulfide, and causing many pathogenic microorganisms. Reproduction, the chicken is more harmful. Therefore, it is necessary to adjust the density of the flock properly according to the breed of the chicken, the different stages of growth, and the different seasons.

Several feeding points to be paid attention to in chicken houses

It is not a small matter to raise chickens, especially when there are a large number of chickens. At this time, we all use battery cage for layers to raise chickens. After all, the continuous development of mechanized chickens and the cost of raising chickens is comparable to In the past, it was relatively large. Therefore, farmers must carry out feeding and management in accordance with standard and scientific methods during the chicken raising process. Do not be affected by other people’s ideas and their own ideas. The following are some chicken feeding points.

The first is that farmers have a bad farming concept. They always think that they can raise at low cost and have high output. However, if you don’t carefully raise the chickens, they will not grow well, and the benefits will naturally not go up, so don’t think about it. You can get good benefits by simply feeding. Many farmers raise their chickens to look at the market. Although the market is on every floor, they can’t always wait for the market. Pay attention to the potential benefits. Don’t wait until others have made money.


The nutrition of chicken feed ldepends on poultry farmers' awareness of chicken health.


If you want to raise chickens well, when the market for chickens is unstable, reduce the welfare of chickens, pay attention to health care and feed nutrition, and the chickens that are produced will be poor. When the market is good, the production performance of chickens will not work. The chicken can’t sell for a good price. Many farmers do not pay attention to the raising of chicks, but the quality of chicks is directly related to the growth productivity of the chickens. Therefore, the management of the brooding period is not good, which will lead to the failure to maintain the egg production rate. The time is short and the benefits of farmers are not high.

Some farmers think that raising chickens is low, and only by strength can raise chickens. Some farmers do not understand chicken technology and management. Chickens still raise a lot, and they are much more nutritious. Moreover, the condition of the house is poor, the necessary hardware for raising chicken equipment is simple, and the conditions created are not determined by the chicken’s demand standard.

Epidemic prevention is a must-have thing in raising chickens. Many farmers do not know how to prevent and control when the epidemic comes, and the mortality rate is high. The epidemic has passed, it is good to forget the pain and not to sum up the experience of failure. These are just a few important points about raising chickens in chicken battery cages . I hope that farmers can raise egg broilers scientifically and reasonably to obtain good economic benefits.

Tips for buying broiler cages

Chicken cage is the most important equipment in the whole chicken raising process. The quality of the chicken cage can directly affect the development of egg broiler and the rate of egg production and meat production. Farmers should choose suitable cages for breeding according to the variety of chickens. The author refers to the recommendations of poultry equipment suppliers to explain the purchasing skills of several farmers when choosing chicken cage equipment.

1. The size of the grid of the bottom cage of the metal cage depends on the diameter of the short axis of the egg and the size of the chicken claw. The mesh should not be too dense. The excessive density not only affects the leakage of manure, but also increases the cost of the chicken cage. The spacing of the warp wire of the bottom net should not be greater than 2/3 of the short axis of the egg, generally 24 to 26 mm; the spacing of the weft should be no more than 2/3 of the length of the chicken claw, usually less than 50 mm.

Broiler battery cage are the suitable poultry farming cage for modern broiler raising.

2. The bottom net is an important part of the chicken battery cages. It has to bear the weight of the chicken, and it is easy for the eggs laid by the chicken to roll off the egg trough in the front of the net to avoid damage. At the same time, most of the manure can leak to the ground and reduce the pollution of the bottom net.

3. Also ensure that the chicken feet are easy to grasp the wire and stand and walk stably and comfortably. Therefore, the bottom net must have certain strength, elasticity, inclination and neutrality, and the material selection and manufacturing requirements are strict. Generally, the bottom mesh material is made of 2.0-2.5 mm diameter low carbon steel welding wire, and the solder joints should be firm; the grid spacing should be uniform; the tilt height difference is 12% to 14%. For the eggs to smoothly roll, the vertical wire of the bottom net should be made. In the upper part, the transverse wire is in the lower part.

4. The front net and the front net of the cage door are the net wall located in the front part of the chicken cage. The main structural size of the front net is vertical steel wire. The spacing should not only ensure the movement of the chicken head, but also the chicken, 50-65 mm. The front net is only as far as the bottom net. Slightly larger than the diameter of the short axis of the egg, usually 50 mm, spelled out of the cage. In the design, you should pay attention to the size of each one to avoid the chicken head, but not to run the chicken. The soil is inclined downward, and the inclination of the lower side of the dish is the same as that of the bottom net.

The above is the purchase skill of the farmers when choosing the chicken cage equipment. The popularity of the cage mode is more convenient for mechanized operations, which can greatly improve labor productivity, which greatly reduces the labor costs. At the same time, it can also be scientifically managed to achieve better economic benefits. It is made of softer steel wire and is more suitable for feeding egg broilers. It has the advantage of being able to bring better economic benefits to farmers.

The development of laying hens and chickens

Most chickens are kept in the backyard before the chicken battery cages are officially used, and laying hens or broilers are often kept with other livestock. This not only greatly increased the use of labor, but also the collection of eggs. Later, the emergence of chicken cages, farmers are better to raise chickens, which is convenient for farmers, and the survival rate of laying hens is higher. There are more and more eggs, and the economic benefits of the farmers are better, so there are many benefits to using chicken cages to raise chickens.


Chickens are kept in layer chicken cage for easy epidemic prevention. Easy management, labor saving, and high labor productivity. The environmental conditions are easy to control, the flocks grow evenly, and the egg production rate is high and stable. Cage raising chicken is a kind of three-dimensional feeding method which is widely used in chicken production and is also the main form of feeding from the ground. The breeding density is large, and the chickens in the same area are raised 3 to 5 times more than the flats, thus saving the houses and the land. Easy to observe flocks and eliminate bad chickens to ensure healthy and productive flocks. Chickens are not in contact with the ground, and there are fewer parasitic diseases, which can save on medication costs.


There are some benefits to using a chicken cage:

(1) Continuous improvement of nutrition, especially the in-depth understanding and practical application of essential amino acid knowledge.

(2) Genetic progress. Including breeding, cross-breeding and supporting applications.

(3) Reduction in mortality. Development and use of various infectious disease control vaccines. The development of an effective immunization program, as well as the reduction of deaths caused by major parasitic infections and similar disability between laying hens.

(4) Environmental control, ventilation control and heat insulation control for intensive feeding.

(5) Establishment and application of lighting procedures.

We believe that the use of laying hens and related technologies has greatly increased the egg production per hen and promoted the development of laying hens. It can be said that the current efficiency of laying hens has reached an unprecedented peak. Laying hen production is the most productive in the entire livestock industry. Bringing great economic benefits to farmers

Do you know how to maintain the automatic feeder?

The automatic feeder is an essential equipment in modern poultry farming equipment. So, you know how to maintain the automatic feeder:

First of all, when running into the feeding machine, it is best not to put anything on it, which will easily lead to excessive motor pressure and burn the motor.

Second, check that the belt is intact and loose. The feeder uses a belt to transport material. Only when the belt is normal can the machine’s production performance be fully utilized and the amount of operation can be maximized.

Third, because the various parts of the feeder are controlled by gears and chains, the gears and chains must ensure maximum lubrication to avoid damage to the machine due to lack of lubrication.

Fourth, because the production of feed will generate a lot of dust, the feed control box will accumulate a lot of dust, which will short circuit the internal circuit and damage the circuit and other components, so occasionally clean the dust in the control box.

5. The main power of the automatic feeder is the motor. The motor has a power motor and a geared motor (because the motor speed is very high, the gear motor will be used to decelerate when transmitting power). When using, check the power motor and geared motor for any abnormality. The motor should be properly maintained, such as adding gear oil to the reducer gear.

The above five points are small suggestions for the maintenance of the automatic feeding machine when the farmers use chicken cage equipment to raise chickens, and hope to help the farmers.

How to control the temperature when using chicken cages to raise chickens?

How to control the temperature with chicken cages? Chicken cages are a very common type of poultry system cages in chicken farms. If you want to make good use of chicken cages for sale, you should learn to control the temperature so that you can raise healthy chickens. What should we do? The author has compiled some relevant content for everyone, let’s take a look at it.

1. Place the thermometer (height and quantity) reasonably. In the standardized chicken house, the length and width of the house are large. The temperature in the house or the north and south sides of the house is inconsistent. Pay attention to the reasonable placement of the thermometer. Put a thermometer in the east, middle and west of the house to get the average temperature in the house.

Observe your flocks in time will prevent your chickens from death greatly.

2. Summer cooling measures (wet curtain). In summer, the temperature inside the house can be lowered by a wet curtain. At the same time, attention should be paid to the opening time of the wet curtain to avoid the temperature in the house is too low, or the temperature in the house is inconsistent, causing the chicken to catch a cold.

3. Temperature control in autumn. The temperature difference between day and night in autumn is large, and the temperature inside the house should be adjusted to avoid the phenomenon of high and low temperature.

4. Winter insulation. In winter, the temperature in the house is raised by heating or by a blower.

The above four points are shared by the author and everyone about the temperature control in the chicken cage. If you want to know more about chicken cages, you can consult a professional at a poultry equipment suppliers.

What are the advantages of using chicken in overlapping cages?

Speaking of chicken cages, everyone will not be unfamiliar. We know that chicken cages are use to raise chickens. Common chicken cages have chicken battery cages . But do you know the advantages of using chickens in overlapping cages?


layer battery cage: The upper and lower cages of this chicken cage are completely overlapped, and there are hen boards between the layers, generally 2-3 layers. The utilization rate of the chicken house is high, and the density per unit area is large, but the number of overlapping layers should not be exceeded. More, 2-3 layers are suitable, there are overlapping egg cages and overlapping broiler cages, overlapping cages are stacked one by one, so that the footprint of the cage will be reduced. This will also save the farmers the use of the area of ​​the house, so that farmers can make full use of the area of ​​the house to do other things. It is also that the overlapping cages are stacked one after another, which fully utilizes the advantages of space, so that the number of breeding households can be increased and the economic benefits of the latter can be improved.


Poultry supplies for broilers are suitable for large scale farming.


The bottom layer of the overlapping cage is at a certain distance from the ground, thus avoiding the chickens from contacting the feces in the chicken house, thereby reducing the damage of the bacteria to the chickens, reducing the incidence of disease and increasing the survival rate of the chickens. The overlapping chicken cages fix the chickens within a certain range, so that the activity of the chickens will be reduced, the energy consumption level will be reduced, and the increase of the feeding conversion rate will save the farmers a lot of feed costs. The overlapping cages are made of high-quality steel, which has high strength and toughness, and has bedding in the bottom net equipment, so as to avoid the occurrence of flock bursitis and chicken leg disease.

The above is the explanation about the overlapping cages. It is more advantageous to use such cages. I hope to help the farmers.

Chicken raising equipment to ensure healthy drinking water

Water is a very important substance. It is indispensable for both humans and chickens. Then we must ensure that the chickens are healthy when they are raising chickens in Poultry Rearing Equipment.

First, choose the water source that meets the standard: Farmers should pay attention to keep away from pollution sources when selecting water sources, such as wastewater discharge lines in factories and living areas, choose tap water or deep well water, require colorless and odorless, and pay attention to microorganisms in water. And mineral content should meet the national drinking water standards.

Second, the installation of filters: for non-water supply water supply farms should pay attention to the installation of filters in the pipes entering the chicken house. In particular, water towers and drinking water pipes that have been used for a long time should be filtered for water quality.

Tird. Disinfection: The hygienic cleaning of the drinking water system of chicken equipment is also very important. The water quality is good, the drinking water system is not clean, and the water that the chickens drink is also unsanitary. The farmers should pay attention to the disinfection work of the drinking water system. A little point:




1. Select cleaning disinfectant: When cleaning and disinfecting the drinking water system, the farmer should choose a cleaning and disinfecting agent that can effectively dissolve the biofilm and mucus in the water line. Before the disinfection work, the farmer must first ensure that the exhaust pipe works normally. Generally, the gas in the tube can be released, and the disinfectant should be used strictly in accordance with the instructions for use.

2. Cleaning and disinfecting water line: When the farmer is disinfecting the water line, the amount of disinfectant needed should be selected according to the length of the water line, then the water line should be opened to completely remove the water in the tube, and then disinfected. The solution is poured into the water line, and then the solution flowing out is observed at the drain to see if there is a characteristic of the disinfecting solution, such as with foam, and then the water line is filled with disinfectant solution.

3. Cleaning and disinfecting water line: After a period of time, the farmer can discharge the disinfection solution and then rinse it. The rinsed water should also contain disinfectant. The concentration of the disinfectant is the same as the concentration of the daily drinking water of the chicken.

4. Removal of scale: After disinfecting the drinking water system, the farmers can carry out the work of eliminating scale. The farmers can choose to use scale remover or acidifier to remove the scale. In the process of use, the farmers should strictly follow the manufacturer’s Instructions for use.

The health of drinking water is directly related to the growth and development of chicken farms. The healthy drinking water is not only beneficial to the healthy development of the flock, but also improves the immunity of the flock and reduces the incidence of chicken in automatic poultry farming equipment. It is conducive to increasing the production efficiency of chicken farms. Therefore, farmers must actively pay attention to drinking water sanitation work to ensure the health of drinking water in chicken farms.